Baby Lock Aventura (BLMAV) Instruction and Reference Guide - Manual (Page 62)

Embroidery Step by Step
B-52
Follow the steps below to prepare the machine for embroidery.
Chapter
3
STARTING TO
EMBROIDER
Embroidery Step by Step
Step 3
Step 1, 2
Step 5
Step 6
Step 4
Step 7, 8
Step 9
Step # Aim Action Page
1 Presser foot attachment Attach embroidery foot “U”. B-53
2 Checking the needle Use needle 75/11 for embroidery. * B-30
3 Embroidery unit attachment Attach the embroidery unit. B-54
4 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place. B-21
5 Fabric preparation Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. B-57
6 Embroidery frame attachment Attach the embroidery frame to the embroidery unit. B-63
7 Pattern selection Turn the main power to on, and select an embroidery pattern. B-62
8 Checking the layout Check and adjust the size and position of the embroidery. B-63
9 Embroidery thread setup Set up embroidery thread according to the pattern. B-56
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.). Ball point needle (golden colored) 90/14 is not recommended for embroidery.