Baby Lock Aventura (BLMAV) Instruction and Reference Guide - Manual (Page 114)

Eyelet Stitching
S-38
Eyelets, such as those on belts, can be sewn.
• Using the table below, refer to “Using the utility
stitch tables in the “Sewing” section” in the “Basic
operations” section.
a
Attach monogramming foot “N”.
b
Select stitch .
c
Adjust either the stitch width or the stitch length to
select the desired eyelet size.
1 7mm
2 6mm
3 5mm
• For details, refer to “Setting the stitch width” and
“Setting the stitch length” in the “Basic operations”
section.
d
Lower the needle into the fabric at the beginning of the
stitching, and then lower the presser foot lever.
e
Start sewing.
→ Once sewing is completed, the machine
automatically sews reinforcement stitches, then
stops.
f
Use the eyelet punch to cut a hole in the center of the
eyelet.
• When using the eyelet punch, place thick paper or
some other protective sheet under the fabric before
punching the hole in the fabric.
Eyelet Stitching
Stitch name Stitch
BLM
A
V
P
re
s
s
e
r f
oot
BL
M
S
P
/BL
M
L
R
BL
21
0A
Stitch number
Eyelet stitch 4-15 91 71 N
1 2 3
Memo
• If thin thread is used, the stitching may be too
open. If this occurs, sew the eyelet twice before
removing the fabric, one on top of the other.