Quick installation – Awind WIGA / WGA-510 User's Manual User Manual
Page 9
9
6
Quick Installation
1)
Connect WPS device to Projector/display through VGA/HDMI port and turn on
projector/display power.
2)
Connect the power adaptor to WPS device and press the power button to turn
on WPS device. System will be ready when the LED light turns to green.
♦
It will show the default standby screen as below when system is ready.
3)
Insert the speaker cable to WPS audio jack for audio output.
4)
Insert the USB mouse or keyboard to WPS front/rear USB port for On-Screen
Display (OSD) control. (Optional)
5)
Insert the USB IWB/Touch Screen cable to WPS rear USB port for IWB remote
touch control if needed. (Please noted that the front 2 USB ports do not support
UoIP function).