beautypg.com

9 resolution settings, 10 projection aspect ratio, 11 enable usb iwb bridge – Awind WIGA / WGA-510 User's Manual User Manual

Page 24

background image

24

8.10.9

Resolution Settings

1)

Click on “Resolution Setting”, choose “Never Change” to keep original desktop

resolution, “Always Change” to change resolution automatically according to

application’s recommendation, or “Always ask me” to prompt a resolution change

message to user.

8.10.10

Projection Aspect Ratio

1)

Click on “Projection Aspect Ratio”, choose “Keep aspect ratio” to keep the original

aspect ratio if the desktop resolution is different from WPS output resolution, or

choose “Fit full screen” to project the screen to full screen.

8.10.11

Enable USB IWB Bridge

1)

Click on “Enable USB IWB Bridge”, it will enable the USB IWB Bridge feature.

2)

When you start the full screen projection, it will bridge the IWB device to your PC

wirelessly.

Note: You have to install the USBoIP driver first. You can find the driver from USB

token.