Awind WIGA / WGA-510 User's Manual - Manual (Page 53)

53
10.4.4 OSD Setup
1) Click on “OSD Setup” option, you can:
Change Standby Image
♦
Change Standby Image: Replace the whole standby image
♦
: Restore to default Logo image.
♦
: Enter or browse the file name and upload the
customized Logo Image. Please refer to remark on screen when select the
file.
You can also adjust the following “Display Option”
♦
Device Information: Show all or Hide all the device information on
standby screen.
(Note:When Device Information set Hide option, the ”Overlay Device
Information” & “Screen Saver Setting” will be disabled)
♦
Overlay Device Information: Enable or disable the device information will
be show on top of projection screen when doing projection.
♦
Screen Saver Settings: Enable or disable the screen saver and also
configure the idle time(Minutes). (default is 5 mins)
: Press “Apply” button after configuration, and follow the reboot instruction
when applicable.
: Press button to abort action.