Awind WIGA / WGA-510 User's Manual - Manual (Page 10)

10
7
WPS Start/Standby Page
7.1 Quick Guide / User-List
1) Connect WPS device to Projector/Display through VGA/HDMI port and turn on
Projector/Display power.
2) It will show the Quick Guide Information, WiFi Network Name, IP Address and
Code on standby screen.
3) If there is sender connected to WPS device, it will show the User-List on standby
screen, conference moderator can use the USB mouse to select the User and
control it remotely.
7.2 Screen Saver
4) System will enter the Screen Saver mode if none is connected, it will restore to
standby status immediately when there is any sender connected.