Awind WIGA / WGA-510 User's Manual - Manual (Page 19)

19
3) The below items are checked as default setting. You can uncheck them to suit
your needs.
Item
Advanced Screen Capture
Send Audio to Display
Auto Power Management
Auto WiFi Connect
8.10.1 Show Receiver Information
1) Click on “Show Receiver Information”, it will display the Receiver Information,
such as WiFi Name, IP Address and code on the upper corners of the projecting
screen, and it will close automatically after 30 seconds.
8.10.2 Web Admin
1) Click on “Web Admin”, it will open the browser and connect to the receiver web
admin page automatically.
(You can find more details of web admin page in Chapter 10-Web Management.)
8.10.3 Search Receiver Device
1) Click on “Search Receiver Device”, it will disconnect from current receiver and
search the receiver again.
8.10.4 Launch SidePad
1) Introduction: SidePad is an application to allow the user to connect
Pad/Smartphone (Android and iOS), PC, and display/projector via WPS device. User
can then control the projecting PC via Pad/Smartphone. Please refer to the below
image for more information.