Avery Dennison Platinum 6039 JavaScript - Manual (Page 67)

Scanning Functions 4-29
Field Description
EnableUPCA Enables/disables the ability to scan UPCA bar
codes. Default: true
EnableUPCE Enables/disables the ability to scan UPCE0 bar
codes. Default: true
EnableUPCE1 Enables/disables the ability to scan UPCE1 bar
codes. Default: false
EnableEAN8 Enables/disables the ability to scan EAN8 bar
codes. Default: true
EnableEAN13 Enables/disables the ability to scan EAN13 bar
codes. Default: true
EnableEANBklnd Enables/disables the ability to scan Bookland EAN
bar codes. Default: false
Supplemental Specifies how to treat UPC and EAN bar codes with
supplemental characters (UPCA+2, for example).
Values are:
USM_REQUIRED
The scanner scans bar codes
with supplemental characters only. For example, it
scans a UPCA+2 bar code, but not UPCA.
USM_IGNORE
The scanner ignores
supplemental characters. For example, it scans a
UPCA+2 bar code as a UPCA.
USM_AUTO
Uses scanning information as
specified in SupRedundancy.
Default: USM_IGNORE
SupRedundancy If using USM_AUTO for Supplement, this sets the
number of times a symbol without supplemental
information is decoded. Values are 2-20.
Default: 7
XmitUPCACD Enables/disables the requirement to transmit UPCA
bar codes with the check digit. Default: true
XmitUPCECD Enables/disables the requirement to transmit UPCE0
bar codes with the check digit. Default: true
XmitUPCE1CD Enables/disables the requirement to transmit UPCE1
bar codes with the check digit. Default: true