Log set, Installation, Log set and coal installation – Avalon Firestyles Salish-1999 to 2000 User Manual
Page 17

Installation
(for qualified installers only)
17
Travis Industries
9 3 5 0 8 1 0 7
1 0 0 2 0 1
Log Set and Coal Installation
Place the strips on the
grate as shown in this
illustration. The front
strip should hang half
way over the burner.
Grate
Place the log set on the
grate. Position the logs
so the rear corners rest
against the log stops.
Place the optional kibbles
in front of the firebox. Do
not place the kibbles directly
over the burner holes.
Side View
One Strip Approximately
7-1/2Ó by 1-1/2Ó
Two Strips Approximately
3Ó by 1-1/2Ó
Preparing the Glowing Embers:
The glowing embers come in a single
strip. Stretch them as thin as possible
(nearly transparent) to form three strips
of the following sizes:
There may be extra material -
save it for future use.
Tuck the front of the ember strip down,
behind the burner with a screwdriver. Make
sure the mat of ember wool is not over the
burner holes. Tuck it behind the burner
tube if necessary.
Note how only a few
ÒwhiskersÓ are over
the burner holes.