Avalon Firestyles AGP Pellet - Manual (Page 38)

38
Maintenance
© Travis Industries 4141230 100-01341
Cleaning the Glass
Open the doors and clean the glass with a non-abrasive glass cleaner and rag.
Emptying the Ashpan
MAKE SURE THE HEATER HAS FULLY COOLED (APPROXIMATELY 45 MINUTES) BEFORE
CONDUCTING SERVICE.
THE ASHPAN MUST BE IN PLACE WHILE THE HEATER IS IN USE.
The ashpan will accumulate ash as you use the appliance. See the steps below to empty the ashpan.
1. Rotate the ashpan door handle clockwise and swing the door open.
2. Remove the ashpan from the appliance and properly dispose of the ashes (see “Disposal of Ashes”
on page 32 for details).
NOTE: Make sure the ashpan is pushed in 100% when replaced (this allows for full flyash coverage).