Avalon Firestyles AGP Pellet - Manual (Page 24)

24
Installation
(For Qualified Installers Only)
© Travis Industries 4141230 100-01341
Installation into a Factory-Built (Metal) Fireplace
"L" Vent Flex Section
HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors from
entering the home.
"L" Vent
Storm Collar
Vertical Cap
Cover Plate (non-combustible)
Silicone
Seal the cover
plate with silicone.
The smoke shelf, shields,
damper, and baffles may
be removed if attached
with mechanical
fasteners.
The firebrick (refractory)
may be removed.
The metal sides, frame members, or other
structural components of the factory built
fireplace may not be removed or altered.
You may remove the leveling bolts and
attach telescoping legs to support the
insert on raised fireplaces.
The metal floor of the firebox may
be removed leaving he fireplace
floor outer wrap.
NOTE: The fixed spacers
under the appliance may not
be removed.
The log grate,
screen (and rails),
and doors (if
present) must be
removed.