Avalon Firestyles 564 Diamond-Fyre GSR2 Installation - Manual (Page 58)

58 Finalizing the Installation
(for qualified installers only)
© Travis Industries 4140926 100-01395
4 Remove the burner by lifting it up slightly and sliding it to the right.
5 Follow the directions below to replace the orifices.
NG LP
Orifice Size #46 DMS 1.3mm
Look here for the orifice identification
Apply thread sealant to the LP
orifice prior to installation. Use
the chart below to identify the
correct orifice.
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
d 15/16"
24mm
c
1/2" Wrench
Use a 1/2" open end wrench
to unscrew the orifice.
b
Rotate the air shutter away
from the orifice and slide it out
to gain access to the orifice. a
Orifice