Avalon Firestyles 564 Diamond-Fyre GSR2 Installation - Manual (Page 38)

38 Installation
(for qualified installers only)
© Travis Industries 4140926 100-01395
Facing Overview
Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Optional non-combustible facing may be installed on the fireplace. Use the guidelines below to determine
the location (also see the following pages for detailed diagrams.
Tile Line Any non-combustible facing under 1" (25mm) thick (see "Thin Facing" on page 39).
Masonry Line Any non-combustible over 1" (25mm) thick (see "Thick Facing" on page 41).
Hearth Line Non-combustible hearth/facing should be installed up to this location (1" (25mm) above the base
of the fireplace). The fireplace may be raised to accommodate thicker hearth materials.
Optional Faceplates – Sizing Chart
Name Height Width Notes
FPX Art., Clsc., Fr Ctry 29” (737mm) 36” (914mm) 61” Radius – May fit over top of tile facing
Wilmington 29” (737mm) 36” (914mm) May fit over top of tile facing
Victorian Lace 27-1/2” (699mm) 32-3/8” (822mm) Optional facing butts to edge of faceplate (tile line)
Bungalow, Tree of Life 27-1/2” (699mm) 32-3/8” (822mm) Optional facing butts to edge of faceplate (tile line)
Shadowbox 32-1/4” (820mm) 45-1/4” (1150mm) Face extends 1” below base of fireplace
Masonry Line
Hearth Line
Tile Line
Tile Line
Masonry Line
Tile Line
Masonry Line
Tile Line
Masonry Line
Tile Line
Masonry Line
Hearth Line
Masonry Line Tile Line
NOTE: The hearth or facing can extend no
greater than 1'' (25mm) above the base of the
fireplace. The fireplace may be raised to
accommodate thicker hearth materials.