Auto-Zone Control Systems EZ-Zone to Auto-Zone Upgrade Guide (Version 01C) - Manual (Page 7)

EZ Zone/Auto-Zone
Upgrade 7
Upgrade Package Selection
There are basically 3 possible EZ Zone to Auto-Zone
upgrade scenarios you may encounter. We have out-
lined these below to assist you in deciding which op-
tion is best for your application. Please see the Auto-Zone upgrade selection chart be-
low to help determine which example best fits your
needs.
Upgrade A Simple EZ Zone Stand Alone
System(s) To The Auto-Zone Basic System
• Each Existing Master Controller Has It’s Own Display
And Keypad And Is Treated As A Separate System
• No Communications Cable Between Existing Master
Controllers
• No Central Display Or Computer Interface Is Desired
See Example #1
On
Pages 8 & 9
See Example #2
On
Pages 10 & 11
See Example #3
On
Pages 12 & 13
Upgrade A Simple EZ Zone Stand Alone
System(s) To The Auto-Zone Plus System
• Two Or More Existing Master Controllers On The Job.
• No Communications Cable Between Existing Master
Controllers
•
The Customer Wants To Connect The Master
Controllers So That They Are Part Of A Networked
System And/Or Install Constant Volume Unit
Controllers Or Other Controller Boards On Their
System
Upgrade A Networked EZ Zone System To
The Auto-Zone Plus System
• Two Or More Existing Master Controllers That Are
Networked Together With A Modem Linc Central
• The Customer May Want To Add Constant Volume
Unit Controllers Or Other Controller Boards To Their
System