Upgrade parts list summary – Auto-Zone Control Systems EZ-Zone to Auto-Zone Upgrade Guide (Version 01C) User Manual
Page 31

EZ Zone/Auto-Zone
Upgrade
31
Upgrade Parts List Summary
All the standard and components that are required or
available for the Auto-Zone to EZ Zone upgrades are
summarized below. See the upgrade examples on pages
8 through 13 of this manual for the parts lists that are
required for your specific application. For other Auto-
Zone products such as CV Unit Controllers, Lighting
Panel Controllers etc., please see pages 14 & 15 or con-
sult the factory to see if these are available for your
specific application.
Part No
Description
OE392-01-ZSYSM
System Manager (Used on Plus Systems)
Includes: System Manager Only.
OE751
EZ Zone To Auto-Zone Basic Upgrade Kit
Includes:
Zone Manager Board w/ Mounting Screws, Plastic Standoff Kit for
Zone Manager, Return Air Sensor, Upgrade Label, Installation Instructions.
OE753
EZ Zone To Auto-Zone Plus Upgrade Kit
Includes: Zone Manager Board w/ Mounting Screws, Plastic Standoff Kit for
Zone Manager, MiniLink w/ Mounting Hardware, Return Air Sensor, 3 Way
Display/Keypad Connector cable, Upgrade Label, Installation Instructions.
OE231
Duct Temperature Sensor
(10kohm with 12” Probe, used for Return or Supply Air Sensor)
Includes: Duct Temperature Sensor, 2 Wire with 12” Long Probe.
OE250
Outside Air Temperature Sensor (10kohm)
Includes: Temperature Sensor Mounted in Weatherproof Handy Box.
OE419-03
Remote Data Link (Modem- External -14,400 Baud )
Includes: Modem and 120/9 VAC Power Supply.
OE361-04
CommLink II (Used on Basic & Plus Systems )
Includes: CommLink II, Power Supply & Cables for Connection to Computer and
Remote Link are Included.
OE752
Replacement EPROM Chip
Contains Auto-Zone software to replace EZ Zone software in Zone Controller
Includes: EPROM Chip
OE755
Modem Linc Central To CommLink II Upgrade Kit
Includes: ComLink II EPROM Upgrade Chip, Upgrade Label
OE754
Master Interface Board To MiniLink Upgrade Kit
Includes: MiniLink EPROM Upgrade Chip, Upgrade Label
EC101600-3
Blank Enclosure Cover
Used to replace EZ Zone Master Controller Cover when Keypad & Display are
not Desired. Includes: Metal Enclosure Cover Only
SP500
ZoneView AZ Software
Windows Based Software for Accessing System using a PC
Includes: 3.5” Floppy Installation Diskettes and Operations Manual.