Denon DBP 4010UDCI - Manual (Page 31)

Troubl
eshooting
Information
HDMI
Control
Function
Pl
ayback
Connections
Getting Started
Specifi
cations
ENGLISH
2
Setting items Setting contents
DENON LINK Mode
Set· the· audio· output· of·
DENON·LINK. G OffH :·Do·not·use·DENON·LINK.
G 2ndH :·Output·digital·audio·using·DENON·LINK·2nd·Edition.
G 3rdH :·Output·digital·audio·using·DENON·LINK·3rd·Edition.
G 4thH :·Output·digital·audio·using·DENON·LINK·4th·Edition.
Compatible· with· jitter-free· connection.· For· more· information,· refer· to·
“DENON·LINK·Connection·q·Making·a·Jitter-free·Connection”·(vpage·
17).·
HDMI :·Improve·HDMI·digital·signal·jitter.
When·set·to·“4th”,·the·HDMI·control·function·becomes·available·from·
the·connected·device.
When· “4th”· is· set· and· jitter-free· connection· is· set· up,· audio· affected·
by· the· jitter-free· function· is· output· from· the· HDMI· terminal· during·
BD· playback.· When· playing· back· media· other· than· that,· video· signal·
is·output·from·the·HDMI·terminal·and·audio·signal·is·output·from·the·
DENON·LINK·terminal,·respectively.
To· play· DENON· LINK· 4th· signals,· connect· to· a· DENON· LINK· 4th-
compatible·AV·Amp·using·an·HDMI·and·a·DENON·LINK·cable.
About·the·4th·setting·of·the·AV·Amp,·see·the·owner's·manual·of·the·
AV·Amp.
•
•
•
•
•
Set the audio signal to be output from the DENON LINK terminal.
DENON LINK Setup
Default settings are underlined.
Setting items Setting contents
User Preset 1/
User Preset 2
This·sets·the·operating·mode·
for·“User·Preset·1”·or·“User·
Preset·2”·selected·by·
.·
Setting·each·of·these·items·
to· “Off”· enables· output· of·
high· quality· analog· signals·
free·of·interference·from·the·
associated·circuits.·
G Digital OutH :·Set·whether·to·output·signals·to·the·digital·audio·output·
terminal.
On :·Enable·digital·audio·output.
Off :·Disable·digital·audio·output.
G Video OutH :·Set·option·of·video·output.
On :·Enable·video·output.
Off :·Disable·video·output.·This·setting·also·disables·audio·output·from·
the·HDMI·terminal.
G DisplayH :·Set·option·for·front·panel·display.
On :·Turn·on·display.
Off :·Turn·off·display.
For·more·information,·see·“Playing·Back·High-quality·Audio·(Pure·Direct·
Function)”·(vpage·38).
•
•
•
•
•
•
Makes settings regarding digital audio and video output modes during Pure Direct mode,
as well as display messages. Two types of setting can be registered.
Pure Direct Setup
Default settings are underlined.
Signals Compatible with DENON LINK Setting and Transmission
The·DENON·LINK·setting·for·the·DENON·LINK··version·of·the·connected·AV·Amp·is·as·follows:
DENON LINK version of
AV Amp
The DENON
LINK setting
of the DBP-
4010UDCI
Media
BD
(During
jitter-free
connection)
DVD-
Video
DVD-
Audio
Super
audio
CD
CD SD
2nd·Edition
(“S.E.”·displayed·near·
terminal)
“2nd” A S S A S S
3rd·Edition
(“3rd”·displayed·near·
terminal)
“3rd” A S S S S S
4th·Edition
(“4th”·displayed·near·
terminal)
“4th” S S S S S S
n
NOTE
With· DENON· LINK· connections,· no· audio· signals· other· than· those· of· BD· are· output· from· the· HDMI·
terminal.
(When·“DENON·LINK·Mode”·is·set·to·“2nd”·and·“HDMI·Setup”·–·“SA-CD·Audio·Out”·(vpage·24)·is·set·
to·“On”,·the·audio·signals·of·Super·Audio·CD·are·output·from·the·HDMI·terminal.)
Remote control operation
buttons
:Displaying·the·menu
·Cancel·the·menu
:Moves·the·cursor·
·(Up/Down/Left/Right)
:Decision·the·setting :Return·to·previous·menu
Setup