Artesyn ViewCheck on ATCA-9405 Installation and Use (September 2014) - Manual (Page 81)

Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51E) 81
4.6.1 CPU
 CpuBurnTest (SP): CPUBurnTest constantly cycles FPU intensive functions.The resultant
calculations are constantly checked for data integrity. If the test detects erroneous data,
the test fails.
 OctBootTest (SP): This test boots the PPs into U-Boot. If the correct U-Boot prompt is
detected, the test is passed.
 OctDDR2MemTest (SP): This test executes the hw-ddr2 memory test on Octeons with
ECC check. This includes below set of memory tests:
– Marching Rows
– Random Data Test
– Random XOR Test
– Self Address Test
– March C-Solid Bits Test
– March C-Checkerboard Test
– Walking Ones Left Test
– Walking Ones Right Test
– Walking Zeroes Left Test
– Walking Zeroes Right Test
– Random XOR Test
 OctRCStressTest (SP): This test executes the hw-rc stress test on Octeon cores for 2
minutes. This test tries to simultaneously run as much of it internal machinery as possible
by performing BIST status check of all cores.
 CpuBenchMark: Tests different arithmetic operations and gives the results.
The OctDDR2Test (SP) tests memory up to 7692 Megabytes.
It does not check the memory range where boot loader and the test program itself resides.