5 access and execution of a test using cli – Artesyn ViewCheck on ATCA-7370 Installation and Use (April 2014) User Manual

Page 34

Installation of ViewCheck

ViewCheck on ATCA-7370 Installation and Use (6806800S48B)

Installing the ViewCheck Service OS image

Before installing the ViewCheck service OS Image, you should have the knowledge of
configuring TFTP, DHCP, and PXE to perform a diskless booting on ATCA-7370. For more
information, refer to the sections 2.2 and 2.3.1 in Basic Blade Services Software on ATCA-7370
Programmer's Reference.

1. Copy the diagnostics-RELEASE-

BUILD.windriver.linux.atca7370.gz

image to the /tftpboot/

directory.

2. Change the PXE default configuration file ramdisk_size=819200, and reboot

the blade.
Once the blade is configured with the new ramdisk image, it will have ViewCheck,
Orion License utils, and Blade Services Framework installed.

3. Generate the Activation record to start using the ViewCheck application. For more

information, see

Obtaining the Activation Record

on page 22

4. After the activation record is placed, restart the ViewCheck application using the

following script:
/opt/diagnostics/etc/init.d/diagcore restart

4.5

Access and Execution of a Test Using CLI

You can access ViewCheck CLI using the following procedure:

1. Establish the secure shell using SSH or Putty.

2. Start the Telnet connection from an already established secure shell.

telnet localhost 11001