DVS -30-2 - Manual (Page 52)

Page 52 13369-1-0203
SIDE PANEL SIDE PANEL SIDE PANEL SIDE PANEL
BACK PANEL BACK PANEL
Z BRACKET Z BRACKET
INSTALLING OPTIONAL BRICK LINER
1. If installed, turn OFF gas supply to fireplace.
2. If installed, remove logs from fireplace.
3. The back panel is to be installed before the side panels.
Place back panel against the rear wall in fireplace.
4. Remove combustion dome diverter from interior, top of
firebox by removing three (3) 10 x 1/2" screws.
5. Place one side panel against the side wall in fireplace. Align
the brick pattern on back panel and side panel.
6. To install the brick panel (Z) bracket you must first remove
the top and bottom screw on the side of the inner casing
front as it attaches to the outer casing. Now, place the brick
panel (Z) bracket over the front edge of the side panel. The
clearance holes on the brick panel (Z) bracket will align
with the top and bottom screw holes on the side of the inner
casing front.
Reattach the top and bottom screws through the clearance
holes on the brick panel (Z) bracket and into the inner
casing front.
OPTIONAL BRICK LINER INSTALLATION INSTRUCTIONS
PARTS LIST
Part Description Kit Number Kit Number Kit Number Quantity
DVS-BL-30-2 DVS-BL-36-2 DVS-BL-42-2 Supplied
Brick Panel (Z) Bracket 11573 10990 10991 2
Brick Panel - Right R-6505 R-6508 R-6511 1
Brick Panel - Left R-6503 R-6506 R-6509 1
Brick Panel - Back R-6504 R-6507 R-6510 1
Part Description Kit Number Kit Number Kit Number Quantity
DVP1A-30-1 DVP1A-36-1 DVP1A-42-1 Supplied
Brick Panel (Z) Bracket 11573 10990 10991 2
Brick Panel - Right R-6546 R-6549 R-6558 1
Brick Panel - Left R-6545 R-6548 R-6557 1
Brick Panel - Back R-6544 R-6547 R-6556 1
BRICK LINER KIT
DVS-BL-30-2, DVS- BL-36-2, DVS -BL-42-2
DVP1A-30-1, DVP1A-36-1, DVP1A-42-1
Empire Comfort Systems, Inc.
Nine Eighteen Freeburg Ave.
Belleville, Illinois 62220-2623
PH: 1-800-851-3153
FAX: 1-800-443-8648
E-MAIL: [email protected]
WEB SITE: www.empirecomfort.com
7. Repeat Step 5 and Step 6 to attach the second side panel to
fireplace.
8. Attach combustion dome diverter into interior, top of firebox
with three (3) 10 x 1/2" screws from Step 4.
9. Installation of optional simulated brick panels is completed