Artesyn MVME55006E Single Board Computer Installation and Use (July 2014) - Manual (Page 90)

Connector Pin Assignments
MVME55006E Single Board Computer Installation and Use (6806800A37J) 90
5.2.6 PMC 1 Interface Connectors (J11, J12, J13, J14)
There are four 64-pin SMT connectors for the PMC 1 slot on the MVME5500 to provide a 32/64-
bit PCI interface and optional I/O interface.
If a PMC module is plugged into PMC slot 1, the memory mezzanine card cannot be used
because the PMC module covers the memory mezzanine connector.
5 QREQ_L 2.5V_VIO 6
7 CPUTCK OPTPU_2.5v 8
9 CPUTMS NC 10
11 SRESET_L NC 12
13 CPURST_L KEY (no pin) 14
15 CHECKSTPO_L GND 16
Table 5-5 CPU COP Connector (J5) Pin Assignments (continued)
Pin Signal Signal Pin
Table 5-6 PMC 1 Connector (J11) Pin Assignments
Pin Signal Signal Pin
1 TCK –12V 2
3 GND INTA# 4
5 INTB# INTC# 6
7 PRESENT# +5V 8
9 INTD# PCI_RSVD 10
11 GND +3.3Vaux 12
13 CLK GND 14
15 GND GNT#/XREQ0# 16
17 REQ#/XGNT0# +5V 18
19 VIO AD31 20
21 AD28 AD27 22
23 AD25 GND 24