ART Pro Audio TCS - Twin Compressor System - Manual (Page 8)

ART TCS Twin Compressor System
REAR CONNECTIONS
1 Rear Input Jacks – The TCS features both ¼ inch and XLR
connectors on the back as inputs wired in parallel. The rear input jacks
accept line level signals up to +20dBu.
The rear inputs of Channel 1 are disconnected whenever the front
panel ¼” jack is used. This allows you to keep the rear inputs
connected in a rack installation and override Channel 1 when you plug
into the front panel ¼” jack.
2 Rear Output Jacks - The TCS features both ¼ inch and XLR
connectors on the back as outputs wired in parallel.
3
¼” Detector Loop Inputs (Rear) – The TCS features 2 detector
loop inputs on the rear that accept line level signals. These are useful
for ducking and voice over applications (the voice signal coming in
must be line level, TS jack for override, TRS jack for loop insertion)
- 9 -