ART Pro Audio TCS - Twin Compressor System - Manual (Page 13)

ART TCS Twin Compressor System
COMMON APPLICATIONS
Setting up the TCS with a mixing console
For most compression situations we want to set the TCS in series with the
channels it will be processing. Start by first placing an insert cable (¼ inch
TRS to 2 ¼ inch TS) into the channel(s) insert point on your console. Next
route the “Send” into the Input of your TCS, and route the “Receive” into the
Output of the TCS. Now the TCS is serially placed in the signal path of your
mixer.
- 14 -