ART Pro Audio TCS - Twin Compressor System - Manual (Page 19)

ART TCS Twin Compressor System
TCS™ SPECIFICATIONS
Dimensions 1.75”H x 19”W x 7.5”D
Weight 7.0 lbs.
Analog Input Connections Front: ¼ inch instrument (unbal)
Rear: XLR, ¼ inch TRS (balanced)
Analog Output Connections XLR, ¼ inch TRS (balanced),
Detector Loop Connections ¼ inch TRS (Tip = Receive, Ring = Send)
Analog Input Impedance
XLR, ¼ inch line 10k Ohm
Instrument Input 1M Ohm
Analog Output Impedance XLR-300 ohms, ¼” -150ohms
Maximum Input Level +20dBu (Rear), +14dBu (Front ¼” instrument)
Maximum Output Level +20dBu
Frequency Response 10Hz to 150KHz, +1dB
Dynamic Range >120dB
Total Harmonic Distortion <0.01% typical @ 1kHz (tube out)
Equivalent Input Noise (EIN)
Rear XLR, ¼” line -97 dBu typical
Front Instrument ¼” -106 dBu typical
Attack Time
Opto 1ms to 100ms (normal), .1ms to 10ms (fast)
VCA 1ms to 100ms (normal), .15ms to 15ms (fast)
Release Time
Opto .4sec to 15sec (normal), .1sec to 4sec (fast)
VCA .16sec to 8sec (normal), 50ms to 2sec (fast)
Slope Variable from 1:1 to > 10:1
Maximum Attenuation 25dB (Opto), 35dB (VCA), 60dB (Gate)
Threshold Range -40db to +20db
NR Threshold Range Off to 0dB
Shelf Frequency Cutoffs 10Hz to 700Hz (Low), 1kHz to 20kHz (High)
Tube Type 12AX7A, Dual Triode, Hand Selected
Transformer Type Torodial
Power Requirements USA – 110-125V AC / 50-60hz/ 16W export
units configured for country of destination.
ART maintains a policy of constant product improvement. ART reserves the
right to make changes in design or make additions to or improvements upon
this product without any obligation to install same on products previously
manufactured. Therefore, specifications are subject to change without
notice.
- 20 -