ART Pro Audio SGX LT - Guitar Preamp with F/X - Manual (Page 17)

APPENDIX A
MISCELLANEOUS NOTES
The presets found in the SGX LT cover a wide range of diversified reverb sounds
and special effects. The following notes provide a starting point for you to use
these presets to add that special if not essential sound to your own individual
sound.
Though it is not mandatory it is strongly suggested you utilize the stereo
capabilities of the SGX LT. Many of the reverb patches and delay effects rely
heavily on stereo image or right left characteristics to achieve the brilliance
and realism found in today's and yesterday's sound!
The most important application of all is to EXPERIMENT! Remember, there are over
250 effect combinations at your fingertips. What may be used for normal desirable
effects can also be applied to create entirely new and different sounds. Your own
ideas and expressions may be realized with just a few pushes of a button. Go
ahead, have some FUN!
The reverb presets come in a variety of ways, shapes and sounds. Emphasis is
placed on different room types, image, position of the perceived sound and the
brightness or dullness of the sound.
The presets reflect a range of reverb effects with different combinations of
these characteristics. Don't be afraid to cycle through a number of presets with
the mix control fully wet so you can hear the actual image position or character
of the preset. Above all don't be afraid to experiment.
APPENDIX B
EXAMPLES
EXAMPLE 1:
Editing the MPT with the SGX LT front panel controls.
In this example, we will edit the MPT so when MIDI numbers 0 and 1 are received,
presets 64 and A1 will be recalled. It is assumed the SGX LT's MPT has not been
edited.
Press and hold MIDI, then BYPASS buttons, release both.
The display will show [0.0] with the decimal point blinking indicating that you
are in MPT edit mode, this left decimal point means that the MIDI PROGRAM number
is in the display.
*-Press and release BYPASS. The display shows [00.] indicating that MIDI number 0
recalls PRESET 0.
*-Press and hold UP until [64.] appears in the display. Now MIDI number 0 will
recall PRESET 64.
*-Press and release MIDI. The display shows [0.0]
*-Press and release UP. The display shows [0.1]
*-Press and release BYPASS. The display shows [01.] indicating that MIDI number 1
recalls PRESET 2.
*-Press and hold UP until [A1.] appears in the display. Now MIDI number 1 will
recall PRESET A1.
13