ART Pro Audio SGX LT - Guitar Preamp with F/X - Manual (Page 16)

unique characteristics are used to simulate a wide range of environments. Within
the other presets are Gated Reverb effects, Reverse Reverb effects, Gated effects
with regenerated delays, Flanging effects, Panning, Chorus effects, straight Echo
effects, Delay based effects such as chorusing and flanging are combined with
reverb and delay to create special effects reverb sounds. A list of all the
presets can be found in the back of this manual.
BATTERY BACKUP
When power is terminated to the SGX LT, the edited MPT is retained via battery
backed up memory. This as well as the last PRESET and the MIDI CHANNEL will be
active when the unit is next powered up. Memory retention is expected to last
four years. If you encounter memory loss, contact our customer service
department.
BYPASS PRESET
PRESET Y9 is a non-sound preset. It is used as a MIDI bypass preset. Use Y9 when
you don't want any effect to be in the signal chain for a particular keyboard
preset. The MIDI PROGRAM NUMBER assigned to Y9 is (127) or [C.7] as it appears in
the display.
SOFTWARE LEVEL
On power up, the SGX LT momentarily indicates its operating software level in the
display. The software controls the SGX LT's functions as well as its sounds.
USER REGISTRATION
Be sure to fill out the USER REGISTRATION CARD in this manual and send it in to
our Customer Service Department. This will ensure you of being notified of
information regarding the SGX LT. Please don't forget to write in your serial
number.
FACTORY RESET
Resetting the MPT
It is very unlikely you would want to reset the SGX LT's MPT. Normally you should
just re-edit the MPT for new values.
Should you wish to set all the values back to their initial state, power down the
unit. Hold in the Up/Down buttons (¿,À) and while holding them in, power up the
SGX LT.
Customer Service
You may contact ART's Customer Service Department between the hours of 9:00 AM
and 4:00 PM Eastern Time Monday through Friday. The Customer Service Department
will answer technical questions about ART products and provide information
concerning service.
12