Hub or switch to router connection, Power on router, Ub or – D-Link DSL-500G User Manual

Page 14: Witch to, Outer, Onnection, Ower, Figure 4. switch to router connection

Text mode
Original mode

DSL-500G ADSL Router User’s Guide

Hub or Switch to Router Connection

Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as
shown in the diagram below:

If you wish to reserve the uplink port
on the switch or hub for another
device, connect to any on the other
MDI-X ports (1x, 2x, etc.) with a
cross-wired cable or use crossover
adapter.

Figure 4. Switch to Router Connection

Power On Router

To power on the device:

1. Insert the AC Power Adapter cord into the power receptacle located on the back of the Router and plug the

adapter into a nearby power source.

2. You should see the Power LED indicator light up and remain lit.