Driverack, Stereo tri-amp application guide – dbx Pro 260 User Manual
Page 69
®
Hardware
1.
Connect the outputs from the mixer to the inputs of the DriveRack™.
2.
Connect the outputs of the DriveRack™ and run to the selected speaker amplifier.
3.
Making sure that all outputs are muted, apply power to the mixer and amplifiers.
Software
1. Select a program (Factory: 2x6 Stereo) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Adjust the individual parameters for the system by pressing the Processing Module buttons
7.2- Stereo Tri-amp
Application Guide
Section 7
DriveRack
™
61
DriveRack™ User Manual
2
3
4
5
JBL SR4731X
JBL 4719X
Left
Right
MA-5002VZ