dbx Pro 260 - Manual (Page 46)

Detailed Parameters
®
38
Section 4
DriveRack ™
Noise Level -10 to 10 (Mixer and Router)
Adjusts the overall level of the pink noise generator.
The output section 480, 481 and 482 DriveRack™ units provide the user with the ability to con-
trol output levels of the unit and adjust phase compensation of loudspeakers within the signal
path. The output level control is located in the signal path before the compressor/limiters; this
means that the compressor/limiter directly affects the output level. The parameters for the
Phase Compensation effect are as follows and are user adjustable. Please refer to section A.9
of the Appendix for a complete output signal routing diagram.
Shift On/Off
This parameter is used to turn the selected output phase parameters on or off. When level is
off, phase is 0
0 and polarity is positive.
Polarity On/Off
This parameter is used to reverse the polarity of the output signal.
Phase 0 to -175 0
This parameter sets the amount of phase within the selected output path. The phase is refer-
enced to the upper frequency of the selected output crossover band.
4.12 Output