dbx Pro 260 - Manual (Page 14)

Getting Started
®
6
Section 1
DriveRack ™
System Setup
• The arrow will indicate the selected Wizard setup. To select any one of the three options,
rotate the wheel. If you are performing the System setup, press either the PG> button or the wheel and the display will appear as follows:
• Simply rotate the wheel to select either a Mono or Stereo input configuration.
Once you have selected your input option, press the button and the display
will appear as follows:
• Simply rotate the wheel to select either a Graphic or Parametric EQ. Once you
have selected your EQ option, press the button and the display will appear as
follows:
• Rotate the wheel to select any one of the numerous Insert modules available. Once
you have selected your Insert 1 module option, press the button and the dis-
play will appear as follows:
• Rotate the wheel to select any one of the numerous Insert modules available. Once
you have selected your Insert 1 module option, press the button and the dis-
play will appear as follows:
• Rotate the wheel to select any one of the numerous custom-tuned MAIN speaker
options available. If the speaker being used is not specified in the menu, select CUSTOM.
Once you have selected your Main speaker option, press the button and the
display will appear as follows:
Select Main PA
JBL SRX
>SR4702X Passive
Main Speaker
Select Insert 2
effect.
>AFS
Insert 2 Setup
Select Insert 1
effect.
>Compressor
Insert 1 Setup
Select EQ as GEQ
or PEQ
>PEQ
EQ Setup
Select Input as MONO
or STEREO.
>STEREO
Input Setup