Installing usb drivers on windows vista, Installation instructions, Installing usb drivers on windows 2000 – ARRIS TM722G-CT User Guide User Manual

Page 35: Installing usb drivers on windows xp, Ista

Installing USB Drivers on Windows Vista

Follow these steps to install USB drivers on Windows Vista.

Installing Touchstone USB Drivers on Vista in 32-bit Mode

When running Vista in 32-bit mode, simply connect your PC to the Touchstone Tele-

phony Modem or Cable Modem. The Vista Hardware Installation Wizard ﬁnds the

correct 32-bit USB driver and installs it for you.

Installing Touchstone USB Drivers on Vista in 64-bit Mode

When running Vista in 64-bit mode, you must install an updated Vista USB 1.1

driver. Follow these steps to obtain and install the driver.

1 Download the zipped Vista USB driver from the ARRIS website at the fol-

lowing link:

http://www.arrisi.com/support/usb/index.asp

2 Unzip the ﬁles to a directory that can be referenced later (Step 8) during the

installation of the USB driver.

3 Connect the USB cable between the Touchstone Cable Modem or Telephony

Modem and personal computer running Vista.

4 When the Found New Hardware screen is presented, select the “Locate and

install driver software (recommended)” option.

Touchstone TM722 Telephony Modem User’s Guide

This manual is related to the following products: