Argox PT-9130 - Manual (Page 186)

PT-90 Mobile Computer SDK Programming Manual 179
 EAN8_Setting Structure – Information of EAN8 settings.
 EAN13_Setting Structure – Information of EAN13 settings.
 Industrial25_Setting Structure – Information of Industrial 2 of 5 settings.

Interleaved25_Setting Structure –Information of Interleaved 2 of 5 settings.

MSI_Setting Structure – Information of MSI Plessey settings.

UK_Setting Structure – Information of UK Plessey settings.
 Telepen_Setting Structure – Information of Telepen settings.
 UPCA_Setting Structure – Information of UPCA settings.
 UPCE_Setting Structure – Information of UPCE settings.
 Matrix25_Setting Structure – Information of Matrix25 settings.

UEGeneral_Setting Structure – Information of UPC/EAN General settings.

IATA25_Setting Structure – Information of IATA 2 of 5 settings.

Trioptic_Setting Structure – Information of TRI-OPTIC settings.

RSS_Setting Structure – Information of RSS settings.
Scan Command Table
The Scan Command Table of PT-90 terminal is used for SCAN_QueryStatus and
SCAN_SendCommand functions. The Scan Command provides a different way to setup the
scanning device.
When user wants to use this library, user should link SCANAPIAX.DLL, SCANAPIAX.LIB
and the relate functions header file (SCANAPIAX.H).