Argox PT-9130 - Manual (Page 134)

PT-90 Mobile Computer SDK Programming Manual 127
ReadSMS
Read a SMS message in SIM card.
DWORD ReadSMS
{
int nIndex ,
int * nStatus ,
LPTSTR lpNumber ,
LPTSTR lpData ,
LPTSTR lpTimeStamp
}
Parameters
nIndex
[in] The one-based index of a SMS message.
nStatus
[out] Receive the message status. The return value can be one of the values in the following table.
Value Message Status
0 "REC UNREAD", received unread message
1 "REC READ", received read message
2 "STO UNSENT", stored unsent message
3 "STO SENT", stored sent message
lpNumber
[out] Receive the sender phone number.
lpData
[out] Receive the SMS message data.
lpTimeStamp
[out] Receive the service center time stamp. Format: "yy/MM/dd,hh:mm:ss", where characters indicate
year (two last digits), month, day, hour, minute, second.
Returned Values
If the action succeeds, the returned value is E_FUNC_SUCCEED . If the action fails, possible returned values are
E_FUNC_ERROR , E_FUNC_PAR_ERROR , GPRS_ERR_DEVICE_ERROR .
Example
int iStatus;
WCHAR szNumber[30], szData[512], szTimpStamp[30];
if(ReadSMS(1, &iStatus, szNumber, szData, szTimpStamp) != E_FUNC_SUCCEED)
AfxMessageBox(_T("Read SMS fail!"));