Argox AS-8020CL - Manual (Page 144)

138
Exit
Query present cradle firmware version
Program
Firmware version list
If you wish to display the cradle and imager
firmware versions, scan the “Firmware version
list” barcode.
Reset cradle to factory default settings
WARNING: Default value initialization
If you wish to return the AS-8020CL imager to all the
factory default settings, scan the above barcode will
perform the feature. However, the cradle will be set to
factory default settings at the same time.
Note: This feature is only available when “Auto Update”
is enabled (see page 12)