Aplex Technology ACS-2210A - Manual (Page 15)

ACS-2210A User Manual 15
8 CTS (Clear To Send)
9 JP3 Setting:
Pin1-2 : RI (Ring Indicator)
(default)
Pin3-4 : 5V Standby power (option)
Pin5-6: 12V Standby power
(option)
10. JP3:
(2.0mm Pitch 2x3 Pin Header),COM1 setting jumper, pin 1~6 are used to
select signal out of pin 9 of COM3 port.
JP3 Pin# Function
Close 1-2 RI (Ring Indicator)
(default)
Close 3-4 COM1 Pin9=+5V (option)
Close 5-6 COM1 Pin9=+12V (option)
11. JP1:
(2.0mm Pitch 1x2 Pin Header), Backlight Control jumper setting for
LVDS1.
Signal Name JP1
PWM Open
DC voltage
Mode
Close
Note:
Please check first your LVDS panel backlight control by DC voltage Mode or PWM?
Panel backlight control by Level 5V.
12. INVT1:
(2.0mm Pitch 1x6 box Pin Header), Backlight control connector for
LVDS1.
Pin# Signal Name
1 DC+12V
2 DC+12V
3 Ground