Aplex Technology ACS-2210A - Manual (Page 13)

ACS-2210A User Manual 13
6. LAN1:
(RJ45 Connector ), Rear LAN port,1 standard 10/100/1000M RJ-45
Ethernet ports are provided. Used Intel 82574L chipset ,LINK LED (green) and
ACTIVE LED (Orange) respectively located at the left-hand and right-hand side of
the Ethernet port indicate the activity and transmission state of LAN.
7. JP485:
(2.0mm Pitch 2x9 Pin Header),COM1 setting jumper, pin 1~18 are used
to select signal out of COM1 port of RS232 or RS422 or RS485 mode.
COM1 Mode JP485 Setting
RS232
(default)
1-3 ( Close)
2-4 ( Close)
7-9 ( Close)
8-10 ( Close)
13-14 (Close)
RS422
3-5 ( Close)
4-6 ( Close)
9-11 ( Close)
10-12 ( Close)
17-18 (Close)
RS485
3-5 ( Close)
4-6 ( Close)
15-16 (Close)