Aplex Technology ARCHMI-807 - Manual (Page 69)

ARCHMI-8XX Series User Manual 68
High Precision Timer
[Enabled]
[Disabled]
Boot Timer with HPET Timer
[Disabled]
[Enabled]
PCI Express Dynamic Clock Gating
[Disabled]
[Enabled]
OS Selection
Use the OS Selection option to select an operating system for the system.
Note:
Users must go to this item to select the OS mode before installing corresponding
OS driver, otherwise problems will occur when installing the driver.
3.4.11 LPSS & SCC Configuration
LPSS & SCC Configuration [ACPI Mode]
SCC Configuration
SCC eMMC Support [eMMC AUTO MODE]
SCC eMMC 4.5 DDR50 Support [Enabled]
SCC eMMC 4.5 HS200 Support [Disabled]
eMMC Secure Erase [Disabled]
SCC SDIO Support [Enabled]
SCC SD Card Support [Enabled]
SDR25 Support for SDCard [Disabled]
SDR50 Support for SDCard [Enabled]
MIPI HSI Support [Disabled]
LPSS Configuration
LPSS DMA #1 Support [Enabled]
LPSS DMA #2 Support [Enabled]
LPSS I2C #1 Support [Enabled]
LPSS I2C #2 Support [Enabled]
LPSS I2C #3 Support [Enabled]
LPSS I2C #4 Support [Enabled]