Aplex Technology ARCHMI-807 - Manual (Page 51)

ARCHMI-8XX Series User Manual 50
GPIO1：
(2.0mm Pitch 2x5 Pin Header), General-purpose input/output port, it provides
a group of self-programming interfaces to customers for flexible use.
Signal Name Pin# Pin# Signal Name
Ground 1 2 NC
NC 3 4 SMB_DATA_R
SMB_CLK_R 5 6 SOC-GPIO22
SOC-GPIO23 7 8 SOC-GPIO25
SOC-GPIO24 9 10 +5V
USB_23：
(2.0mm Pitch 2x5 Pin Header), Front USB connector, it provides one USB port
via a dedicated USB cable, speed up to 480Mb/s.
Signal Name Pin# Pin# Signal Name
5V_USB23 1 2 5V_USB23
USB3_N 3 4 USB2_N
USB3_P 5 6 USB2_P
Ground 7 8 Ground
NC 9 10 Ground
Note:
Before connection, make sure that pinout of the USB Cable is in accordance
with that of the said tables. Any inconformity may cause system down and
even hardware damages.
JP5：
(2.0mm Pitch 2x3 Pin Header), COM3 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM3 port.
JP5 Pin# Function
Close 1-2 RI (Ring Indicator) (default)
Close 3-4 COM3 Pin9=+5V (option)
Close 5-6 COM3 Pin9=+12V (option)
COM3：
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM3 port is controlled by pins No.1~6 of JP5,
select output Signal RI or 5V or 12v, for details, please refer to description of
JP5.