Aplex Technology ARCHMI-807 - Manual (Page 43)

ARCHMI-8XX Series User Manual 42
external audio source via a Line in cable. MIC is the port for microphone input
audio.
Signal Name Pin# Pin# Signal Name
+5V 1 2 GND_AUD
LINE-OUT-L 3 4 LINE-OUT-R
FRONT_JD 5 6 LINE1_JD
LINE_IN-L 7 8 LINE-IN-R
MIC-IN-L 9 10 MIC-IN-R
GND-AUD 11 12 MIC1_JD
34. LINE_OUT1:
(Diameter 3.5mm Jack), HD Audio port, an onboard Realtek ALC662-VD codec
is used to provide high quality audio I/O ports. Line Out can be connected to a
headphone or amplifier.
35. USBCON1:
USB0/USB1：(Double stack USB type A), Rear USB connector, it provides up to
two USB2.0 port, High-speed USB 2.0 allows data transfers up to 480 Mb/s,
support USB full-speed and low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors
into different Receptacle.
36. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green)
and ACTIVE LED (yellow) respectively located at the left-hand and right-hand
side of the Ethernet port indicate the activity and transmission state of LAN.
37. BUZ1:
Onboard buzzer.