Aplex Technology AHM-6057A - Manual (Page 40)

AHM-6XX7A User Manual 40
Small Logo [EPA] Show
[Disabled]
Security Option [Setup]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CPU Feature
The item has the following options:
Delay Prior To Thermal [16 Min] (This item allows you to set the duration of entering CPU thermal
throttling.)
C1E Function [Auto] CPU Power-saving State Enable Control
CPU C State Capability [C1] CPU Power-saving State Control
Execute Disable Bit [Enable] (Virus Protection Technology)
Hard Disk Boot Priority (IDE Storage Device Boot Priority)
This item is used to specify boot priority of IDE devices. Press "Enter" key for detailed setting.
Virus Warning
This item has two options: "Disabled" and "Enabled".
CPU L1 & L2 Cache
This item can be used to enable or disabl e the CPU’s primary (L1) or secondary (L2) cache. If set
to Enabled, operating speed of PC will be increased remarkably; if set to Disabled, the function will be
inactivated.
Hyper-Threading Technology
Enable and disable Intel's hyper-threading technology.
Quick Power On Self Test
This item is used to accelerate Power On Self Test (POST) process. If set to Enabled, BIOS will
shorten or skip some of its tests.
Enabled (default) Quick POST
Disabled Normal POST
First/Second/Third/Boot Other Device
BIOS will load the operating system according to the boot order of available devices. If disabled,
the function will be inactivated.
PXE Boot For Onboard LAN1/LAN2(boot from PXE)
Disabled(default) System will run appointed boot device first after POST, If system can not find