Aplex Technology ARCHMI-707 User Manual
Page 36
34
High-speed USB 2.0 allows data transfers up to480 Mb/s ,support USB full-speed and low-speed
signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors into different
Receptacle.
25. LAN1/LAN2
:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M RJ-45 Ethernet
ports are provided. Used Realtek RTL8111E chipset, LINK LED (green) and ACTIVE LED (yellow)
respectively located at the left-hand and right-hand side of the Ethernet port indicate the
activity and transmission state of LAN.
26. BUZ1:
Onboard buzzer.
27. LED1
:
LED STATUS. Green LED for Motherboard
Power status.
28. LED2
:
LED STATUS. Green LED for Motherboard
Standby Power Good status.
29. CN1
:
(DF13-40P Connector),For expand output connector, It provides one 18/24bit single channel LVDS,
one Backlight control, two USB ports, one power led, one HDD LED, one power on/off button, one
RESET.
Function
Signal Name
Pin#
Signal Name
Function
LVDS
12V_S0
2
1
12V_S0
LVDS
BKLT_EN_OUT
4
3
BKLT_CTRL
Ground
6
5
Ground
LVDS_VDD5
8
7
LVDS_VDD5
LVDS_VDD3
10
9
LVDS_VDD3
Ground
12
11
Ground
LA_DATAP0
14
13
LA_DATAN0
LA_DATAP1
16
15
LA_DATAN1
LA_DATAP2
18
17
LA_DATAN2
LA_DATAP3
20
19
LA_DATAN3