Aplex Technology APC-3591A - Manual (Page 24)

APC-3X91A User Manual 24
2 MSDATA
3 Ground
4 +5V
5 KBCLK
6 MSCLK
3 BIOS Setup Description
3.1 Operations after POST Screen
After CMOS discharge or BIOS flashing operation, the system will display the
following screen for your further operation. Press F2 key to continue or F1 key to
enter CMOS Setup.
AMIBIOS© 2006 American Mega trends , Inc.
BIOS Date: 03/08/11 23:27:33 Ver: 08.00.15
CPU : Genuine
I ntel(R) CPU 575 @ 2.00GHz
Speed : 2.00 GHz
Press F11 for BBS POPUP
Initializing USB Controllers. . Done.
2013MB OK
Auto-Detecting Pri Master.. IDE Hard Disk
Pri Master : Hitachi HTS545016B9A300 PB0C64G
Ultra DMA
– 5, S.M.A.R.T. Capable and Status OK
Auto – detecting USB Mass Storage Devices ..
00 USB Mass storage devices found and configured
CMOS Settings Wrong
CMOS Data / Time Not Set
Press F1 to Run SETUP
Press F2 to load default values and continue
0085
After optimizing and exiting CMOS Setup, the POST screen displayed for the first time is
as follows and includes basic information on BIOS, CPU, memory, and storage devices.
AMIBIOS© 2009 American Mega trends , Inc.
BIOS Date: 03/08/11 23:27:33 Ver: 08.00.15
CPU : Genuine
I ntel(R) CPU 575 @ 2.00GHz
Speed : 2.00 GHz
Press DEL to Run Setup
Press F11 for BBS POPUP