Analog Way SHOT BOX - MIDRA PLATFORM -Ref. SB-80 - Manual (Page 2)

It may take a few seconds for the application to succeed. In case of failure, the RCS²
application will attempt to reestablish a new connection with the Shot Box once every 3
seconds. When properly detected, the RCS² application briefly displays the type of Shot
Box connected and the status bar indicates the Shot Box connection status as well as the
selected layout option. Click this area to display the Shot Box settings box:
Use the slider to adjust the Shot Box LED backlight intensity if necessary. You can also
temporarily disable the Shot Box keys by checking the box Key Lock .
If your Midra™ device is configured in Matrix mode, you can configure the Shot Box
either to recall presets from Master Memory (two screens simultaneously) or to recall
presets from Memory (Screen 1 or Screen 2 only).
Matrix mode OR Mixer/Quadravision mode