Analog Way OCTO VALUE - Ref. OXE831 Programmer's Guide - Manual (Page 3)

3
TP TP Rd/Wr TBARPO 0 255 Tbar position in percent RAZ auto after EFFON=0
YK YK Rd/Wr LOCK 0 3 locking of the unit bit 0 = Menu locked
bit 1 = Input control buttons locked
ws ws Rd/Wr STDBY 0 1 standby mode 1=unit in stand-by mode
0=unit in normal mode
wp wp Rd/Wr STDBYEN 0 255 adjustment of the missing time of synchro
to pass in stand-by mode 0=OFF
1=1min
255=255min
wo wo Rd/Wr MESSON 0 255 Content the switch ON message for the
VP (video projector) Octets à serialiser
wf wf Rd/Wr MESSOFF 0 255 Content the switch OFF message for the
VP (video projector) Octets à serialiser
wr wr Rd/Wr MESSRATE 0 3 RS232 communication's speed rate to the
VP 0=1200bauds
1=2400bauds
2=9600bauds
3=19200bauds
wt wt Rd/Wr MESSCTRL 0 6 management of the VP messages 0=no command (NULL)
1=reset IMESSON (raz auto)
2=reset IMESSOFF(raz auto)
3=ask reading MESSON(raz auto)
4=ask reading MESSOFF(raz auto)
5=erase MESSON
6=erase MESSOFF
wi wi Rd IMESSON 0 50 pointer for the table of the message ON of
the projector Pointed case of the table, incremented
automatically after Reading or Writing
on MESSON
wI wI Rd IMESSOFF 0 50 pointer for the table of the message OFF
of the projector Pointed case of the table, incremented
automatically after Reading or Writing
on MESSOFF
az az Rd/Wr AUTOSET 0 1 auto-setting 1 = start auto-setting
OH OH Rd OHSIZM 0 65535 Main output size in pixel