3 detection, 4 alert – AGI Security SYS-4HNVR304 Manual User Manual
Page 32
MAIN MENU
26
5.4.3 DETECTION
ADVANCED CONFIG
CONNECTION
CH1 CH2 CH3 CH4
CAMERA
ALARM OFF
DETECTION
SENSITIVITY 0
ALERT
MOTION ON
NETWORK
AREA EDIT
DISPLAY
INTERNAL ALARM
ON
RECORD
NOTIFY
EXIT
1) ALARM
Select N.C./ N.O depending on your installation need. The default alarm value is OFF.
2) SENSITIVITY
Select the detection sensitivity of the selected channel, the lower the value, the higher the sensitivity.
3) MOTION
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
4) AREA
Click “EDIT” to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note: To exit area setting and return to the detection page, right click your mouse.
5) INTERNAL
ALARM
(For selected camera models only)
This function appears only when the camera connected supports human detection.
Select “ON” to enable human detection, or “OFF” to disable it.
5.4.4 ALERT
ADVANCED CONFIG
CONNECTION
EXT. ALERT
ON
CAMERA
INT. BUZZER
OFF
DETECTION KEY BUZZER
ON
ALERT
VLOSS BUZZER
ON
NETWORK
MOTION BUZZER
ON
DISPLAY
ALARM BUZZER
ON
RECORD
HDD BUZZER
ON
NOTIFY
ALARM DURATION (SEC)
5
HDD NEARLY FULL (GB)
5
HDD OVERHEAT ALERT (°C)
60
EXIT
1) EXT.
ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all internal buzzers: KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to “OFF”, item 3) to item 7) will be disabled even though they are set to ON.
3) KEY BUZZER
Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).