AGI Security SYS-4HNVR304 Manual - Manual (Page 30)

MAIN MENU
24
5.4 ADVANCED CONFIG
5.4.1 CONNECTION
To manually assign the address of your camera connected locally, click “URI” to modify.
ADVANCED CONFIG
CONNECTION CHANNEL URI CONFIG
CAMERA CH1 AVTECH://ip_office.ddns.eagleeyes.tw:80 SETUP
DETECTION CH2 ONVIF://10.1.1.14:88 SETUP
ALERT CH3 AVTECH://10.1.1.30:88 SETUP
NETWORK CH4 AVTECH://10.1.1.12:88 SETUP
DISPLAY
RECORD
EXIT
Then, click “SETUP” to enter the access information of the camera:
CONFIG-CH1
USER NAME admin
PASSWORD **********
CACHE TIME (MSEC)
MODEL AVTECH
GET TYPE IP CAMERA
PROFILE PROFILE-3
TYPE H264
IMAGE SIZE 720 X 480
QUALITY
I.P.S. 30
AUDIO ON
EXIT
Step1: Enter the user name and password to access the IP camera.
Step2: Click “GET TYPE” to detect and make sure the access information you’re intended to connect is correct.
Step3: Select the image size, image quality, and I.P.S.
Note: The options selectable for “IMAGE SIZE” and “I.P.S.” depends on the camera you’re intended to
connect.
Step4: (Optional) For the camera with audio recording, select “ON” or “OFF”.