Zilog Z8FS021A - Manual (Page 23)

UM023302-1214 19
ZMOTION ® Intrusion Detection Development Kit
User Manual
Windows Vista 32/64 Systems
Observe the following steps to install the USB SmartCable on a Windows Vista system.
1. Connect the USB SmartCable to a USB port on the development PC.
2. After the PC detects the new hardware, it will display the Found New Hardware Wiz-
ard dialog box. Click Locate and install driver software (recommended).
3. Depending on your development PC’s User Account Control settings, Windows may
ask for permission to continue the installation. Click Continue.
4. When the Insert the Disc dialog appears, select I don’t have the disc. Show me other
options. Click the Next button to display the Windows couldn’t find driver dialog.
5. Select Browse my computer for driver software (advanced) to display the Browse
For Driver dialog, which prompts you to key in or browse for the location of the
driver’s
.inf
file. Depending on the type of computer you use (32- bit or 64-bit), use
the Browse... button to navigate to one of the following paths, then click the Next but-
ton.
On 32-bit Vista systems, navigate to:
\device drivers\USB\x32ƒn
\device drivers\USB\x32
On 64-bit Vista systems, navigate to:
\device drivers\USB\x64ƒn
\device drivers\USB\x64
6. When the Windows Security dialog prompts you whether to install or not to install,
click Install this driver software anyway and wait until the installation is completed
(Windows may prompt you more than once).
7. When the software has been installed successfully, click Close.
Windows XP Systems
Observe the following steps to install the USB SmartCable on a Windows XP system.
1. Connect the USB SmartCable to a USB port on the development PC. When the PC
detects the new hardware, it will display the Found New Hardware Wizard dialog.
2. In the Wizard, select Install from a list or specific location (Advanced), then click
Next.
If the Windows Hardware Installation dialog appears, click Continue Anyway.
3. In the Please choose your search and installations dialog, select Search for the
best driver in these locations and include this location in search.
4. Use the Browse... button to navigate to one of the following paths:
Note: