Zilog EZ80190 - Manual (Page 3)

ZDI232ZPAK2ZPK
ZiLOG ZPAK II Debug Interface Module
Page 3
UM016301-1003 Configure the Hardware
If working in a networked environment, set the ZPAK II module IP address and subnet
mask to match the existing network setup. See “"Changing ZPAK II Module Settings to
Match the PC"” for instructions.
Changing the PC’s Settings to Match the ZPAK II Module
The following instructions are for the MS Windows XP platform. If your Windows operat-
ing system is different, please refer to your MS Windows OS online help for details.
1. Open the Windows Control Panel and double-click the Network and Internet
Connections icon. The Network Connections dialog box appears (Figure 3).
Figure 3. The Network Dialog