Zilog Z51F6412 User Manual
Page 52
UM025901-1112
Stand-Alone Flash Programming Using the Keil µVision
Z51F6412 Development Kit
User Manual
45
Appendix C. Stand-Alone Flash
Programming Using the Keil µVision IDE
Observe the following procedure to program Flash memory without debugging.
1. From the
Project
menu, open the
Options for Target 'your project’
, and click the
Utilities
tab. In the
Use Target Driver for Flash Programming
drop-down menu
within the Configure Flash Menu Command pane, ensure that
Zilog Z8051 Target
Driver
is selected, as indicated in Figure 38.
2. Click the
Settings
button to change any additional Flash options. The Settings dialog
will appear, as shown in Figure 39.
Figure 38. Selecting A Target Driver For Flash Programming
This manual is related to the following products: