Zektor Palladia™ 8X8 - Manual (Page 12)

12 HDA800(V2) User Guide, Version 1.3, 9/12/13
Using the Front Panel
Mapping an input to an output zone
Mapping an input to an output zone with breakaway options
To map any source (input) to any zone (output):
If the LCD display is not at showing the main menu press the MENU button.
To change the Audio mappings:
Use the SELECT knob to select the “Map Audio Input /Output” option: AudSw
To change the HDMI mappings:
Use the SELECT knob to select the “Map HDMI Input /Output” option: HdmiSw
To change the HDMI mappings with audio/video breakaway:
While in the HdmiSw screen, press the BACK button.
The BACK button is used to flip between the normal HDMI switching screen, and the HDMI with
audio/video breakaway screen.
When using the HdmiSw with breakaway screen, the 1st (single digit) source is the HDMI video
channel. The 2nd (two digit) source is the HDMI audio channel. For instance in the above display
HDMI zone 3’s video channel is set to source 5, the audio channel is set to source 14.
HDMI: A 1 2 3 4 5
SRC: 00[03]00 00 00 00
SELECT
MENU ZONE
SETTING
NEXT BACK
HZ: A-AA 1-1A 2-2A 3-3A
HS: 0-00[4]01 0-00 5-14
SELECT
MENU ZONE
SETTING
NEXT BACK