Operating controls and adjustments, Locking switch in the “off” position, Starting and stopping saw – Delta 36-650 User Manual
Page 19
19
LOCKING SWITCH IN
THE “OFF” POSITION
IMPORTANT: When the tool is not in use, the switch (B)
Fig.56, should be locked in the OFF position using a
padlock (C), with a 3/16" diameter shackle to prevent
unauthorized use.
STARTING AND
STOPPING SAW
1.
The on/off switch is located underneath the switch
shield (A) Fig. 54. To turn the saw “ON,” move switch
trigger (B) to the up position.
OPERATING CONTROLS AND ADJUSTMENTS
2.
To turn the saw “OFF,” push down on switch shield
(A) Fig. 55.
Fig. 54
A
B
Fig. 55
A
Fig. 56
C
B